Tel: +61 2 9679 0045
Fax: +61 2 9679 0048
PO Box 3192
Rouse Hill NSW 2155
The Compuload Analogue Dial Forklift Scale

The Compuload Analogue Dial Forklift Scale

is a low cost scale giving you an effective means of safely weighing your goods prior to loading trucks. Stops overloading equipment and transport. Helps to reduce your risk of over loading fines. As well as checking incoming goods.

Compuload 500 Digital Forklift Scale

Compuload 500 Digital Forklift Scale

is a cost effective means of weighing goods on your forklift truck. Constructed in a sturdy stainless steel housing to ensure long life. Optional printer is available. Suitable for most Forklifts up to max 15 ton capacity.

Compuload 1000 Digital Forklift Scale

Compuload 1000 Digital Forklift Scale

is a compact digital forklift scale suitable for weighing goods on your forklift truck or small farm loader. Constructed in sturdy alloy housing with powder coated finish to ensure long life. Suitable for most Forklifts, Container lifters and small farm loaders.

Compuload 5000 Digital Front End Loader and Forklift Scale

Compuload 5000 Digital Front End Loader and Forklift Scale

is the new generation front end loader / forklift scale for weighing goods in your yard. Standard features include large 80 x 100mm backlight display, accumulation of weighing data and printing ability.

Compuload 6000 Digital Front End Loader and Forklift Scale

Compuload 6000 Digital Front End Loader and Forklift Scale

has all the same features as the 5000 series scale plus with data management allowing the operator to save the weighing data to an internal memory, entering product details etc as well as the possibility to upgrade the unit to download the data via USB Flash drive.

Compuload Load Cell Forklift Scale (LCFS)

Compuload Load Cell Forklift Scale (LCFS)

is a high accuracy forklift scale working with loadcells the weighing modules are the core components of the forklift weighing system. The Compuload LCFS weighing modules have been specifically designed to meet all essential criteria for retrofit forklift weighing systems. NMI Trade Approved Weighing Options Available.

Interested in becoming a distributor? Contact us today

Compuload LoadManager

series-3000.pdfdownload Compuload Loadmanager brochure here 

The Compuload Loadmanager Truck Scale is a highly advanced digital scale that uses the existing wiring for communication between the Compuload Loadmanager Truck Scale display and sensor boxes on the trailers.  Using a microprocessor and built-in memory, Compuload Loadmanager Truck Scale calculates the current loads from the air pressure in the suspension system and display weights in three digital values.  The Compuload Loadmanager Truck Scale / On-Board weighing systems can be used on all types of vehicles with axles or axle groups equipped with air or steel spring suspension system for the steer axle.  Due to the modular design, our products are flexible and can be individually adapted to most types of vehicles excluding leaf spring suspensions.


Alarms when limits are exceeded

The Compuload Loadmanager Truck Scale display offers 2 individually adjustable alarms levels:
Alarm 1 is indicated by flashing diodes for individual axle which has exceeded limits. 
Alarm 2 switches on an internal electronic “relay” when the GWT for vehicle is exceeded.  This  signal can be used as ON/OFF input for other units, for example an On-Board computer. 

The Compuload Loadmanager Truck Scale brings efficiency in transportation, helps avoiding fines and optimizes your loading procedure.


Air circuits and sensors

On all vehicles you get optimal accuracy with two Independent air inlets for each axle, one for the pneumatic Circuits (right and left) per axle or axle group.  The Compuload Loadmanager Truck Scale calculates the current load on each axle from two reference values LO and HI.  Using a single sensor on the front axle typically offers you the same accuracy compared with an front axle air



Compuload Loadmanager Truck Scale is exactly as flexible as your vehicle:

ü  Do you have a truck equipped with steel springs on the front axle and air suspension on the rear axles combined with a lift axle?           

ü  Do you have a truck with 2 front axles equipped with steel springs and two rear axles divided in left hand and right hand air circuits?   

ü  Do you want to couple a trailer or semi trailer on the above vehicles?

ü  Do you want to couple a low bed trailer equipped with hydraulic suspension on a truck equipped with air suspension?

ü  Do you want to swap from one trailer to other trailer?

The answer to all of the above is No problem.  Compuload Loadmanger Truck Scale is a truly flexible truck scale.  Individual calibration values are stored in the Compuload Loadmanager Truck Scale unit on each vehicle.


Associated units

Compuload Loadmanager Truck Scale has printing options via either RS232 com’s port and can be used with the Compuload 4070 compact printer.


How does it work?

The Compuload Loadmanager Truck Scale weighing system, calculates the actual load from the linearity between airbag pressure and load.  Using 2 reference points (LO/HI Values) the Loadmanager Truck Scales calculates the actual axle load to within 1-2% or better accuracy.


The Basic’s

Airbag pressure is proportional with the load on the axle.  Levelling value regulates the air volume in the airbag, so ride height remains the same.  Mechanical suspension is common on many trucks.  A strain gauge (SG) sensor is mounted directly on the axle beam or on the parabolic springs.  Accuracy is the same as air suspension sensors.


Technical Specifications


  • Supply voltage             10...30 volt direct current
  • Current consumption    max. 90mA
  • Alarm 1                       Flashing display
  • Alarm 2                           output open collector NPN  Max  0.2A/ 50 VDC
  • Display                        Three digits 7 segments, LED with a 20.3mm Character height
  • Accuracy                         2% of maximum load at 0°C - +50°C*
  • Air connection               Quick release connection 6mm air hose
  • Maximum pressure        15.5 bar (225 psi)
  • Operating pressure        Range 0 to 10.5 bar (0 to 150 psi)
  • SG Sensor                     0-20mA input
  • On Board Computer       RS-232 serial
  • Printer                          RS-232 serial
  • Device bus                    Power line communication
  • Operating temperature   -25°C... + 70°C
  • Storage temperature      -40°C... + 70°C
  • Dimensions                    182mm x 53mm x 75mm / Single Din
  • Weight approx               550grams
  • Approvals                      CE and e1   


 Compuload Loadmaster Truck Scales Features

 Feature packed weighing system for trucks.

  • Current combination GWT*.
  • Current load on all individual axles.
  • Payload per truck/trailer*.
  • Alarm for exceeding GWT.
  • GWT per truck/trailer*.
  • Payload for the entire combination*
  • Alarm for overload on individual axles.
  • All weights displayed in tonnes.
  • Control all the data safely from inside your truck cabin.
  • Load manager display fits into a single DIN cut out.
  • Multiple set up options = greater flexibility.
  • Made in Europe